Hacked Gadgets Forum

December 28, 2011

DIY Home Automation – using Voice activated commands

at 3:31 pm. Filed under Crazy Hacks, DIY Hacks, Funny Hacks


Check out this wonderful project that you can use to automate your home using voice commands without spending big bucks. To build this, you will only require few popularly used components like:

  • a VRbot voice recognition module
  • an AVR ATtiny2313
  • a 433MHz RF send module
  • low-cost wireless light swiches (or relays)

 VRBot speech recognition module is basically the core of this project. It recognizes 32 custom voice commands.  Once a command is recognized, a wireless switch is activated via a radio receiver.

Via: Hacknmod

Watch out this video to learn more:





Priligy farmaco il precoce online su priligy . Priligy a used premature therapy standard shipping all with price...

Related Posts

DIY Home Automation Box
DIY Home Automation using a Cheap Router
Voice Controlled Robotic Helicopter
OpenHAB Raspberry Pi Home Automation Build
Arduino GSM Home Automation System
Wireless Voice-Controllable Smart Home Project
Introduction to Home Automation
X10 Lighting Monitoring



One Response to “DIY Home Automation – using Voice activated commands”

  1. DIY Home Automation with Voice Command - DIY Blog Says:

    […] ORIGINAL ARTICLE: http://hackedgadgets.com/2011/12/28/diy-home-automation-using-voice-activated-commands/ […]

Internal Links:



Hacked Gadgets

Site Sponsors:

Nuts and Volts Electronic Labs Trossen Robotics Free Technical Publications Blue LED


Recent Comments:

More RSS Feed Options

Site Sponsors:


Interesting Sites: