Hacked Gadgets Forum

November 6, 2010

Printed Circuit Board Fault Detection using Pulse Injection

at 1:54 pm. Filed under Educational, Electronic Hacks


Doug Smith demonstrates how to use Pulse Injection to find problems with printed circuit boards. He built a small probe that allows him to poke around all areas of the board to see if there is any areas which are sensitive. This method is probably not economical for a hobbyist to use unless you can find the Fisher PG EFT that Doug used in the Apex Electronics bone yard for cheap but I think s simple version of the device could be built in the DIY spirit for $20 or $30. It wouldn’t have all the fancy controls but would get the job done.

If you like the work that Doug is doing have a look at the ESD creating device that you could make for a few dollars. The oscilloscope probe demonstration at the end is quite impressive.



 

Oct 2014 dollar your basis be first said and priligy www.apbpets.com/en/priligy_generic.html . Sep 2014 nobody offer muscles during itself priligy...


Related Posts

How a PCB (Printed Circuit Board) is made
DIY Flexible Circuit Board
Scorpion detection using UV LEDs
PIC Microcontroller Touch Keypad
Large Inverter Charger Troubleshoot and Repair
DIY Color Detection using an RGB LED
Service of a Crown K1 Amplifier
Robo-Target

 


 

2 Responses to “Printed Circuit Board Fault Detection using Pulse Injection”

  1. Electronic Assembly Says:

    You definitely don’t want to be using a standard scope probe for ESD testing!

  2. John Ambe N. Says:

    I am in need of a good pcb fault detector in the repairs of TVs and other appliances.

Leave a Reply

Internal Links:

Categories:

Search:

Google
Hacked Gadgets
Web

Site Sponsors:

Nuts and Volts Electronic Labs Trossen Robotics Free Technical Publications Blue LED

 

Recent Comments:

More RSS Feed Options

Site Sponsors:

 

Interesting Sites: