Hacked Gadgets Forum

April 26, 2009

Fireball V90 CNC Router Assembly

at 7:35 am. Filed under DIY Hacks


Mount gantry to frame and install Y axis lead screw

Place the gantry onto the gantry slides and attach with the nuts and bolts as shown. Tighten slowly as the gantry is moved back and forth to ensure that it will not bind when fully tightened. Slide the lead screw with bearing, washer and tensioning clamp as shown. Twist the lead screw through the gantry drive nut and tighten both tensioning clamps to secure it in place.


Previous PageNext Page