Hacked Gadgets Forum

April 26, 2009

Fireball V90 CNC Router Assembly

at 7:35 am. Filed under DIY Hacks


Install gantry lead screw and gantry drive nut

Ensure the Z axis assembly slides back and forth smoothly if it doesn’t adjust the frame until it does. Insert the lead screw through the side of the gantry assembly, install the bearing, washer and tensioning clamp as shown. Screw it through the z axis assembly and install the bearing, washer and tensioning clamp on the opposite end also. Tighten the clamps to hold the lead screw in place. Finally install the lower drive nut with the supplied nuts and bolts.


Previous PageNext Page