|
Bob Davis shares his technique to repair laptop LCD display using some white LEDs. Bob has lots of interesting hacks documented and has some cool videos on Youtube.
“You first need to remove the screen from the laptop computer. Then you need to remove the metal trim at the bottom of the screen, assuming that is where the light is located. Some screens have connections to the screen that go around the backlight and make in nearly impossible to remove the light. Once the light is removed the LED’s can be glued in with a clear glue. You might want to solder the LED’s together in groups of 3 for 9 volts or 4 for 12 volts first. I used 1/2 inch spacing between the LED’s for more even lighting. Once the LED’s were glued in and working I used alumimum tape like what is used on furnaces to make a 1/2 inch strip to go on the display to cover the LED’s and to replace the metal strip I had removed. Be very carefull as the tape and the cover are conductive and will easily short out the LED’s. I used electrical tape to insulate the cover and my connections.”
|
January 5th, 2008
I like these mods, but the site is down. I have one laptop that is dim and needs something like this done to it.
January 5th, 2008
Looks like the site is up now. It’s Geocities so it may go down now and then from traffic.
January 5th, 2008
I’d suggest using a current regulator for those.
January 5th, 2008
Site is down. any page on geocities will die with more than 10 page views
This mod is right up my alley, as i have a lcd dismantled on my workbench for a similar idea. In particular, I wanted to know what type of LEDs he was using, specifically color temp ect… I have a whole bunch of LEDs that appear too ‘blue’ for this purpose.
March 28th, 2008
This is what I need to do. Is there any info on how to connect the led’s to usb power supply with the required resistance etc. A more detailed post maybe? Thanks
March 28th, 2008
check out the site linked to in the article.