|
Here is a well documented DIY tutorial on how to build a basic electronic speed controller. The article takes your through a ground up process on how to build the circuit as well as how to program the PIC that controls the speed controller. DIY - Electronic Speed Control |
December 21st, 2007
Hey, while we’re on the subject of site modifications, any chance of removing the:
target=”_blank”
from the external story links?
–Phil.
P.S. A continuation in the “minor irritations feedback for competition entry” series..
December 24th, 2007
[…] It might be “yet another” «device» controller that operates over phone-line, but this one works for sure The task was to build a device that connects to the phone line and has a relay as an output switch. It should also sense if the connected «consumer» is turned-on or off and report to the administrator at the other end of the phone line. The administrator would then call-in the device, log in with the password, and check the state of «consumer», turn it on or off, change password or some other settings. Current version has only one relay. [via] […]
December 24th, 2007
[…] Here is a well documented DIY tutorial on how to build a basic electronic speed controller. The article takes your through a ground up process on how to build the circuit as well as how to program the PIC that controls the speed controller. The article does indicate that the design does lack sophistication, but this is a good place to start. You could use this design as a learning process and then modify the circuit as needed. [via] […]
December 29th, 2007
I’ve actually got nearly everything required for this. Looks like a fun project to try. I need to set up a website to post the results of the various projects I find here and actually complete.