|
Alfred73 has made some interesting projects. This one is the Six Channel IR Remote Control System which uses a customized remote control to take control of some normal appliances. It is based on the older 16F84 PIC but should be simple to convert to work with the 16F628A. Code and the schematic are provided on the site. The IR signal of a specific remote controller is received from an IC receiver(SFH 505 or similar ) and sent to the pic, the inside program decodes the algorithm and switches 6 output ports and the corresponding relays .You can use it to control 6 appliances of your room such as lamp, radio, Hi-Fi , TV , computer and so on .The range is great about 10 meters”
|
Sildenafil sold, and various trade is a used treat viagra .
All and to part the trusted lasix .
Learn the medication drug dosage, side drug.
April 17th, 2008
i am intrest this project
May 27th, 2008
Please can you give theSchematic circuit and code to make
June 22nd, 2008
i am intrest this project
June 23rd, 2008
I can’t find circuit diagram only the code.please gudie me
July 7th, 2008
i was interested in this project. if you dont mind can you please send me the details of the project including the circuit diagram and how it works.
until then, thanks alot
July 18th, 2008
i was interested in this project. if you dont mind can you please send me the details of the project including the circuit diagram and how it works.
until then, thanks alot
July 18th, 2008
Please can you give theSchematic circuit and code to make
July 18th, 2008
Hi amine,
Click on the link in the article for more details.
July 30th, 2008
interesting,pls kindly send me d details of d project,its circuit diagram and how it works.thanks
regards.
October 25th, 2008
please can u send me the schematic circuit and code to make it
November 7th, 2008
Hi Alfred. I was browsing through your site when i found one of your projects that caught my interest. Its this 6-channel infrared remote system. I have the code already but when i click on the schematic, my browser seem to direct me on a different page. Will you please send me the schematic of this project? I am an electronics enthusiast and i would really love to try this one out. Please send me my request as soon as you read this message. I will be looking forward to that. Good job!
November 8th, 2008
You may want to leave a comment about that on the guest book of the project creator.
http://digilander.libero.it/alfred73/indexe.htm
January 15th, 2009
this project very interesting..
can i get the schematic ? thx
February 17th, 2009
that is good
but it will be better if you showed the circuit
March 10th, 2009
Bund patake..!
Tere ton circuit ni dita janda..
Eni bund marai fer vi ckt ni miliya..
Apni gand me lele ye remote..
Parontha..!
April 6th, 2009
hi
i found a good project “10 Channel IR Remote Control System – PIC 16F84 Based” a complete one (pcb scheme hex asm )
if interesed just mail me at
saber_hamila@yahoo.fr i will send all project
free for all
May 27th, 2009
hi, i am intrest in this project the Six Channel IR Remote Control System – PIC 16F84 Based Please can you give theSchematic circuit
June 10th, 2009
hi, this a nice project , please send me full documentation on email
June 10th, 2009
hello, i am interested in this project , please send me full documentation schematic and code
July 14th, 2009
hye..i’m interested in this project..please send me full documentation schematic and code..
thank you
July 14th, 2009
Hi sabrina,
Please click on the link in the article.
April 20th, 2010
am interested in your project,can l get the schematic and code especially schematic
thank you
April 20th, 2010
am interested in your project,can l get schematic
makrew2000@yahoo.com
June 22nd, 2010
i appreciate your effort and really have interest in the project,pls can you give me the circuit diagram and the hex file? i will appreciate if you can send it. thanks in advance.
February 10th, 2011
i appreciate your work.pls can you email me the circuit diagram ,program and the hex file? i will appreciate if you could do it. thanks.
August 30th, 2011
Hi can you please send me the schematic and code for the IR reciever project
November 16th, 2011
this is what am looking 4, can you please send me the schematic and code for the project.
November 23rd, 2011
I M LOOKING FOR CKT DIAGRAMME OF UNIVERSAL REMOTE SO PLEASE SEND ME INFORMATION ABOUT THIS PROJECT AT PATELPALACESKD@YAHOO.COM
March 13th, 2012
Thank you Iam interested in your project
March 13th, 2012
Thank you Iam interested in your project plz send me all the documentation
March 16th, 2012
i am very intrested in this project