Using an old serial GPS the guys as Semifluid have made a home made GPS data logger on the cheap. As usual schematics and directions are on the site.

“This project focused on creating a simple serial data logger for the Delorme Tripmate (also known as the GPSTripmate). The Tripmate is an older GPS receiver that can be purchased on eBay for <$20. I happen to have one that my family used a couple of years ago and it is still in great shape. It has been sitting in the back of my car for the past four years, so I finally decided to put it to good use. The plan was to create a GPS data logger that would record the position of the unit and allow me to read back the latitude and longitude after acquiring the data. My ultimate goal will be to use a small backpack to record my runs (once the weather warms up). This was a fun experiment because not only did I need to interface the PIC16F88 to the Tripmate, but I also needed to parse the output and implement an efficient storage solution. Read on to find out more information about the project, see the schematic and soure code I wrote, and find out how the data was visualized.”